Round Profile:
A fine ‘wrap-around’ profile, eliminates any tendency to board cracking caused by ‘shoulders’ in creasing rules with a flatter profile.
The thickness is precisely compatible with Sandvik cutting rules.
Point sizes |
2,3,4 and 6. |
Heights |
Up to 30mm |
Availability |
coils and meter lengths |
Hardness |
MR - 400 Hv (41 HRC) |
Applications |
A selection of creasing rules for all substrates |
|
|
Special Profile:
A medium hard grade creasing rule that allows a reduce size head to be used for tighter, smaller creases without having to change the cut or profile on the die board.
The tip of the creasing rule is thinner that the body but the body rigidity is maintained.
Point sizes |
1 or 1.5 on a 2pt body
2 or 2.5 on a 3pt body |
Heights |
Up to 23.80mm |
Availability |
coils and meter lengths |
Hardness |
400 Hv (41 HRC) |
Applications |
Ideal for intricate packaging designs and where tighter creasing is required in restricted areas. |
|
|
Duplex:
A 4 point bodied creasing rule with the benefit of a double 2 point creasing profile for a squarer crease on thicker materials.
Point sizes |
4pt |
Heights |
Up to 23.80mm |
Availability |
coils and meter lengths |
Hardness |
400 Hv (41 HRC) |
Applications |
Thicker cards and plastic materials |
|
|
Laser Crease:
Made from a solid piece of tempered steel, which means the head will not separate during diecutting. Laser crease offers various creasing options on a range of boady sizes.
Available with round or flat tops.
Point sizes |
3 and 4pt on 2pt body
4pt on a 3pt body
6 and 8pt on 3 or 4pt body. |
Heights |
Up to 27mm |
Availability |
coils and meter lengths |
Hardness |
330 Hv (33 HRC) |
Applications |
For better creasing in corrugated and fibre boards. |
|
|
Trufold:
The bead formed on the head provides an accurate score line with a steel shoulder support. The rule has been specifically designed to eliminate “roll” and achieve truly accurate folding in the direction of the corrugation.
Point sizes |
6 on 4pt body, 8on 4pt body |
Heights |
Up to 23.62mm |
Availability |
coils and meter lengths |
Hardness |
330 Hv (33 HRC) |
Applications |
Developed for heavy duty corrugated board |
|
|